Camm-pakit™
Camm-Pakit™
The Camm-Pakit™ is the most advanced technology available for packaging two-component and three-component pre-measured liquid systems. These easy-to-use packages are safe, convenient, reliable, and precise. Packages can be any mix ratio in sizes from 2 grams to 6 pounds. Camm-Pakits™ are used to package epoxy, urethane and silicone systems in a wide range of viscosities for both industrial and consumer use. The Camm-Pakit™ is manufactured with a newly developed tri-laminate barrier film which is highly resistant to most epoxy systems. A burstable membrane seal is installed across the package separating the part A from the part B, requiring deliberate pressure to burst the seal, allowing both components to mix.
Contract Packaging:
Contract packaging is available through our Dispense Pak™ division for a variety of one-and two-component liquid and paste systems.
Lead times on production orders are 2-3 weeks when standard stock size Camm-Pakits™ are used. Samples and prototype packages available at no charge. Samples available in 1-2 weeks.
Standard Stock Size Camm-Pakits™ | ||
Outside Dimension | Ratio | Capacity |
1.5” x 5” |
1:1
|
2 - 4 grams |
2” x 6” |
1:1
|
5 - 6 grams |
2.75” x 8” |
1:1
|
10 - 20 grams |
2.75” x 10” |
1:1
|
20 - 30 grams |
4.25” x 8” |
1:1
|
30 - 50 grams |
4” x 10” |
1:1
|
50 - 70 grams |
You can supply your liquids or pastes to be packaged or our affiliate could recommend and supply a standard or custom formulation. Custom printing directly on the Camm-Pakit™ or a custom printed outer package is available with your company information and/or instructions.
Let CAMMDA's Dispense Pak™ Division take chemical packaging out of your hands and into our safe, clean, well-ventilated production facility, where your filling and packaging will be handled under the strictest quality control standards from start to finish. Let us share our capabilities with you.